Upgraded multifunctional hammock
Rainproof and sunshade
Rainproof and mosquito proof, multi-purpose bed
Safe rollover prevention
Extended pendulum waterproof
Prevention of mosquito and insect infestation

Hammock &Outer Tent Accessories
Aluminum poles x2
Straps x2
Hammocks and netsx1
Outer of tent x1
Aluminum ally hooks x2
Bag x1
Aluminum alloy studs x2
Ropes x2

Tough, wear-resistant, and not easily bent
Support and sleep for 2 adults
The 7-series aluminum alloy support using aviation materials is lightweight and resilient, effectively supporting mosquito nets and external nets, while also supporting the hammock.

High Quality,Non-strectch Straps
(9.2ft per strap)
☑ Reinforced Triple Power Stitching
☑100%Non-Stretch Polyester
☑ UPGRADED loop design!
Adjust your hammockin seconds!
☑ Multi-Connection Loops(10 per strap)
☑ Load Weight Reach 200KG Each Loop
☑ Easier to Setup,Adjust &Take Down!
ProVenture
I*competitors

Upgrade Enhanced Edition
One bed, four uses, humanized and more thoughtful
Comfortable, breathable, and intimate contact with nature
1.When there is no support rod, it is a regular hammock
2. After the support rod supports the mosquito net, it becomes the mosquito prevention hammock
3. After installing a waterproof outer tent above, it becomes a rainproof hammock
4. When there are no trees, it can be placed on the ground and used as a regular tent

Upgrade Enhanced Edition
One bed, four uses, humanized and more thoughtful
Comfortable, breathable, and intimate contact with nature
1.When there is no support rod, it is a regular hammock
2. After the support rod supports the mosquito net, it becomes the mosquito prevention hammock
3. After installing a waterproof outer tent above, it becomes a rainproof hammock
4. When there are no trees, it can be placed on the ground and used as a regular tent

② Bottom 70D nylon+waterproof adhesive
Lightweight nylon parachute fabric, cotton treated, comfortable and skin friendly, with waterproof treatment on the bottom, with a waterproof coefficient of 1000MM. It is waterproof and effectively prevents mosquitoes from penetrating and biting.
③ The interior space inside the canopy is extremely spacious
The interior space of the tent is enormous, and the arc shaped support rod expands the interior space of the hammock, creating a comfortable space
④ The air inside and outside the canopy is smooth and not stuffy
There is a gap between the outer and inner tent, allowing the air inside and outside the tent to circulate and not be stuffy. The air is fresh and closer to nature.

Detail display of hammock
Moisture-proof, durable, strong, comfortable, and convenient
1. Waterproof nylon fabric+PU adhesive
Nylon material parachute cloth is used internally for waterproofing, mosquito resistance, and external anti tearing plaid+PU glue is used for seam pressing, which can block heavy rain in the wild
2. High density mosquito net net
48 holes per inch
11000 holes per square meter
Effectively preventing the entry of small mosquitoes
3. Lightweight aviation nail+zipper
The 7-series aluminum alloy ground nails of aviation materials are sturdy and lightweight; High quality double pull head with smooth internal and external pulling
4. Lightweight aluminum alloy aviation brace
The 7-series aluminum alloy using aviation materials is lightweight and resilient, effectively supporting mosquito nets and external nets, while also supporting the hammock
5. Internal storage bag and hook
There is a storage bag inside the tent that can hold mobile phone chargers and other hooks, and camping lights can be hung to protect your eyes

Window view

STEP1 Selection of Hanging Bed Position
1.The distance between two trees
(hangingpoint)should be 3-4 meters.
2.The appropriate diameter of the trunk is 10-30
cm.Make sure the trunk is strong enough.
3.The hanging point should be about 1.2meters above the ground.
4.The ground should be relatively flat

STEP2 Preliminary construction of hammock
1.Use the band to tie the trunk with the end ofloop(one or two circles around the trunk),and then put the other end of the band throughthe ring,tighten.
2.Hook the alloy hook at both ends of thehammocks to the loop on the bands.makethe hammock stralght,be approprlately tightand not too loose.
3.Put the net face to the ground,so that you can use an ordinary hammock

STEP3 Construction of mosquito proof hammocks
1.Put two aluminum alloy poles through thetwo net tube on the top of the hammock
2.Fix both ends of the poles in the ribbon metalhole on both sides of the hammock.Then the hammock net sets up
3.Tie the ropes to the ribbon ring on the bothsides of hammock.The other end of the ropetie to the ground with aluminum alloy nails.donot taut the rcpe
4.So that the hammock does not shake.a mosquito net hammock is set up.

STEP4 Construction of rainproof external tent
1.Lay the outer tent on the hammock .Makesure the opening of the the outer tent andthe net is in the same direction.
2.Connect the buckle on the both sides of theouter tent to the metal holes on the hammock(the end of the aluminum rods).the elasticityof buckle on the ribbon can be adjusted.
3.Tied the ropes which are inside the tent tothe corresponding position on the pole.
4.On the both end of the tent,the ribbon ringwere hung into the buckles on the ends ofthe hammock.through the ribbon to adjustthe buckle tension
5.There are two ropes on the ends of the tent,tiedtightly to prevent the rain into the hammock.
6.The tent flap can be rolled up,with a ropebuckle fixed to access.
7.Finished

HOW TO SET UP YOUR HAMMOCK

The hanging straps are a unidirectional design and needs to be setup properly for maximum durability and performance.The multi-adjustment end should always be closest to the carabiner/hammock.
1.Find 2 living trees
approximately 10-12 feet apart
that can safely support the
hammock and its occupants.
2.Unpack hammock and
hanging straps and inspect
for wear 8 tear
3.Wrap straps around the treeapprox 45ft from the ground andthread the multi-adjustmentend through the labeled end.
4.Attach carabiner to a loop
on multi-adjustable end.(close
till you hear the click and
visually confirm the gate is
closed before use.)Never
open carabiner while in use.
5.Repeat the process for the other strap.Gently lower yourselfinto the hammock to determine if the straps need to be movedup/down to achieve a hanging height of 18"or less.
Product Care
Keep hammock out of direct UV light when not in use and storein a cool place
Never leave hammock unattended.
Prevent damage by removing shoes and any sharp or irregularobjects from pockets before using hammock.
Hammocks are flammable;keep away from open flame &embers.
To wash,remove carabiners and hand wash in cold water usingmild detergent;hang dry.

ACCIDENTS HAPPEN.USE HAMMOCK WITH CAUTION.
·Use only under safe conditions.
·Always follow provided instructions.
·Never hang the hammock higher than 18inches off the ground.
·Always check that the area under the
hammock is free of sharp objects,rocks,orany other objects that could be a hazard inthe case of a fall.
·Before every use,fully inspect your hammock(including carabiners and rope)and thehanging straps to check for snags,fraying,and general wear and tear in addition toanything unusual and/or different from thetime of first use.If anything suspect is foundduring inspections,please discontinue use.
·Do not permit children to use unattended.
·Do not jump/swing aggressively in hammock.
·Always test the hammock to ensure it is hungcorrectly before putting your full weight into it.
·Do not stack hammocks.
·Do not modify your hammock.
·Do not untie hammock knots.
·Do not remove this label.